The surface of the steel wire rope with open socket leaves the tool marks and wear marks in the process of stress concentration, which is the source of crack propagation. Therefore, after the processing of the steel wire rope with open socket parts, the surface reinforcement of the parts is required. Grinding by fitter to deal with processing hazards. Some edges, sharp corners, and orifices of the steel wire rope with open socket parts are blunt and R-shaped. Generally, the surface of the electric steel wire rope with open sockett will produce a metamorphic layer of about 6-10μm, the color is grayish white, the hardened layer is brittle and has residual stress, and the hardened layer should be completely eliminated before use. The method is surface polishing. , sanding to remove the hardened layer.
During the grinding and electric machining of steel wire rope with open socket parts, the workpiece will have a certain magnetization and a weak magnetic force. It is very easy to suck some small things. Therefore, before assembly, the workpiece should be demagnetized and treated with acetic acid. Grease to clean the surface. During the surface assembly process of steel wire rope with open socket, first refer to the assembly drawing, find the parts, then list the order of each steel wire rope with open socket parts, list the precautions, and then start assembling For the mold, the guide bushing is usually installed first, then the mold frame and the convex and concave mold are assembled, and then the gaps, especially the gap between the convex and concave molds, are adjusted and assembled. After the assembly is completed, the mold inspection is performed, and the overall situation report is written. For the problem of finding steel wire rope with open socket parts, the reverse thinking method can be used, that is, from the post-process to the forward process, from the finishing to the roughing, and checking one by one until the problem is solved and the problem is solved.