Some edges 35x7 wire rope tensioner, sharp corners, and orifices of the 35x7 wire rope tensioner parts are blunt and R-shaped. The surface of the 35x7 wire rope tensioner leaves the tool marks and wear marks in the process of stress concentration, which is the source of crack propagation. Therefore, after the processing of the 35x7 wire rope tensioner parts, the surface reinforcement of the parts is required. Grinding by fitter to deal with processing hazards.
During the grinding and electric machining of 35x7 wire rope tensioner parts, the workpiece will have a certain magnetization and a weak magnetic force. It is very easy to suck some small things. During the surface assembly process of 35x7 wire rope tensioner, first refer to the assembly drawing, find the parts, then list the order of each 35x7 wire rope tensioner parts, list the precautions, and then start assembling For the mold, the guide bushing is usually installed first, then the mold frame and the convex and concave mold are assembled, and then the gaps, especially the gap between the convex and concave molds, are adjusted and assembled. For the problem of finding 35x7 wire rope tensioner parts, the reverse thinking method can be used, that is, from the post-process to the forward process, from the finishing to the roughing.