The typical structure of the facial contacted wire rope have many forms, such as 6Kx7+FC(IWR、IWS)、6Kx19S+FC(IWR、IWS)、6Kx25Fi+FC(IWR、IWS)、6Kx26WS+FC(IWR、IWS)、6Kx29Fi+FC(IWR、IWS)、6Tx31WS+FC(IWR、IWS)、6Tx36WS+FC(IWR、IWS) and so on.
Compared with usual strands of steel wire ropes, the steel wire ropes which are twisted by facial contacted wire rope have stronger breaking force. The facial contacted wire rope make steel wire ropes contact with pulley better. And that, on account of large metal area of steel wires outside layer, the facial contacted wire rope are wearproof and corrosion resistant.When the steel wire ropes are used in multi layer take-up reel, the flat surface of the facial contacted wire rope insure that there will not be the phenomenon that steel wire ropes scratch or damage for the reason that adjacent strands rub with each other. This characteristic make the facial contacted wire ropes be appropriate for the occasion with multi layer take-up.
When the facial contacted wire rope bear force, its stress is much smaller than line contact steel wire ropes because the base area between steel wires is large. Therefore, the facial contact wire ropes twisting equipment has large traction.