Due to the soft texture of the hoist rope 6x25fi, if the surface coating is not used, it is easily worn by the plastic, which accelerates the damage and changes the gloss of the injection molded part. The non-electroplated nickel coating adds 50 RC to the surface of the hoist rope 6x25fi mold, making it sufficient to protect and extend the gloss and structure of the hoist rope 6x25fi mold surface. The non-electroplated nickel coating can achieve better surface finish quality than the hoist rope 6x25fi itself, but it must be noted that some hoist rope 6x25fi surface treatment is required before the hoist rope 6x25fi mold can be plated.
In order to be able to produce better parts of the hoist rope 6x25fi by injection molding, in addition to extending the service life of the hoist rope 6x25fi mold, the manufacturer also hopes that the surface of the aluminum hoist rope 6x25fi mold can maintain a certain degree of gloss, so it is recommended to use non- Electroplated nickel spray process, as this method helps to extend the life of the hoist rope 6x25fi mold surface finish, making it relatively easy to produce decorative parts.